LONGTEC
  • Home
  • Products
    • Complete Filling Line
    • Standalone Machines
    • Analytical Instruments
    • Weighing Products
    • Level Instruments
  • About Us
  • Case
  • News
  • Service
  • Contact Us
  • 日本語
  • English
  • Español
  • русский язык
  • Français
  • بالعربية
Home  >  Products  >  Level Instruments  >  MTF Miniature Tuning-Fork Point Level Switch
mtf-06-main-white.webp
mtf-01-cover.webp
mtf-02-dual-view-a.webp
mtf-03-dual-view-b.webp
mtf-04-key-specs.webp
mtf-05-typical-applications.webp
mtf-07-cable-and-connector-types.webp
mtf-06-main-white.webp
mtf-01-cover.webp
mtf-02-dual-view-a.webp
mtf-03-dual-view-b.webp
mtf-04-key-specs.webp
mtf-05-typical-applications.webp
mtf-07-cable-and-connector-types.webp

MTF Miniature Tuning-Fork Point Level Switch

The MTF is a micro tuning fork level switch in 316 stainless steel, built for liquid level detection in small vessels, pipes and dosing tanks where a full-size fork will not fit. The fork is short and slim, so it can be mounted through a 1 inch thread or a 1 inch flange on a tank wall, a sight glass boss or a process line. Piezo crystals excite the fork at resonance and the electronics switch when the liquid damps the vibration, which means the reading does not depend on conductivity, dielectric constant, pressure or temperature, and foam or a thin coating on the fork does not create a false signal. Two electrical connections are offered: a cable gland sealed to IP65 for ordinary areas, or an aviation connector sealed to IP68 for wash-down. The output is NPN or PNP, selectable by the user, and a status LED shows the switching state. Sensitivity and switching delay are adjustable, and an explosion-proof version is available for classified areas.

Email: marketing@longtec.com

Tel: 00864007808806

Whatsapp: 8618269775217

REQUEST A QUOTE
Main Functions
Applications
Spec Sheet
FAQ
Main Functions

· Micro fork in 316 stainless steel, short enough to fit a 1 inch boss on a small tank, pipe or dosing vessel.

· NPN or PNP output selectable by the user, with a status indicator showing the switching state at a glance.

· Cable gland version sealed to IP65, or aviation connector version sealed to IP68 for wash-down and wet areas.

· Switching is isolated from vibration and mechanical resonance, so plant vibration does not cause chatter.

· Sensitivity and switching delay are both adjustable, which covers low-density liquids and foaming products.

· Explosion-proof version available for classified areas, with 1 inch male thread or 1 inch flange process connection.

Applications

The MTF is used for high and low level alarms on small tanks and day tanks, pump dry-run protection, overflow protection on filling lines, and level detection in dosing and mixing vessels. It suits water, coolants, lubricants, solvents, beverages, dairy products, syrups, ink and coating materials, and it is also used on small hoppers of powder where a compact probe is needed. Because the fork is only a few tens of millimetres long, it can be fitted into a 1 inch boss on a pipe or a 1 inch flange on a compact vessel.

Spec Sheet

MTF spec table

FAQ

What is the difference between the MTF and a standard fork switch?

Size. The MTF fork is much shorter and slimmer, so it fits a 1 inch boss on a small tank, a pipe or a dosing vessel where a 185 mm fork would not enter. The principle and the switching behaviour are the same.

Which output do I need, NPN or PNP?

It depends on the input card of your controller. NPN sinks the signal to 0 V and PNP sources it from the supply; the MTF lets the user select either on the instrument, so one stock item covers both wiring conventions.

Will foam or a coating on the fork cause a false alarm?

A light coating does not damp the fork enough to switch it, and foam that does not wet the fork is ignored. For products that crystallise or polymerise, mount the fork so that it drains, and use the adjustable delay to filter short excursions.

Can it be used in a wash-down area?

Yes, with the aviation connector version, which is sealed to IP68. The cable gland version is IP65 and is intended for dry or protected areas.

Is an explosion-proof version available?

Yes. The MTF is offered as an explosion-proof standard type for classified areas; the process connection is a 1 inch male thread or a 1 inch flange, and the Ex marking is stated on the nameplate of the delivered unit.

Related Products

LV100 Vibrating-Rod Point Level SwitchLV100 Vibrating-Rod Point Level Switch
LF100 Tuning-Fork Point Level SwitchLF100 Tuning-Fork Point Level Switch
LF1000-Ex Explosion-Proof Tuning-Fork Point Level SwitchLF1000-Ex Explosion-Proof Tuning-Fork Point Level Switch
PFG86 Rotary-Paddle Point Level SwitchPFG86 Rotary-Paddle Point Level Switch
LB100 RF Admittance Point Level SwitchLB100 RF Admittance Point Level Switch
PL7300 Level TransmitterPL7300 Level Transmitter
LONGTEC

Solutions & Support

We go the extra mile to thoroughly analyze each project and deliver tailored business solutions that meet your specific requirements.

  • TR200H Analog Weighing Signal Transmitter
  • TR700L Digital Weight Transmitter
  • UNI800S Digital Weight Transmitter
  • UNI900D3 Digital Weighing Instrument
  • IM2000 Online Infrared Moisture Analyzer
  • Company Profile
  • Why Choose Us 
  • Certificates
  • Company Partners
  • Privacy Policy
  • Tel: 400-7808-806
  • E-mail:marketing@longtec.com
  • Address:No. 3 Jinliang Road, Hongqi Town, Jinwan District, Zhuhai City, Guangdong Province, China

Copyright © 2026 singoo Technical supp

  • Whatsapp

  • Inquiry

Contact US

×