
















TR700L Digital Weight Transmitter
The LONGTEC TR700L is a DIN-rail digital weight transmitter that conditions load cell signals and delivers them to a PLC, PC or plant network at high speed. A 24-bit delta-sigma front end with 16,000,000 internal resolution samples up to 200 times per second, while dynamic digital filtering cancels the effect of platform shake and plant vibration. Four limit outputs, high-high, high, low and low-low, are available for simple interlocking, and the transmitter supports digital or physical calibration plus calibration-free instrument replacement, so a failed unit can be swapped without re-weighing the vessel.
· DIN35 rail housing with a compact footprint fits standard control cabinets, so the transmitter sits next to the PLC it feeds.
· Delta-sigma conversion with 16,000,000 internal resolution samples up to 200 times per second for fast, stable weight values.
· Eight fieldbus options cover RS-232, RS-485, CANopen, CC-Link, Profibus-DP, Modbus TCP, Profinet and EtherNet/IP networks.
· Digital or physical calibration plus calibration-free instrument replacement lets you swap a failed unit without re-weighing the vessel.
· Dynamic digital filtering cancels platform shake and machine vibration, keeping the displayed weight readable during filling.
· Four configurable limit outputs give high-high, high, low and low-low interlocking without extra relay hardware in the panel.
The TR700L is used in process weighing and force measurement where a controller needs a fast, accurate weight value: hopper and silo scales, dynamic check-weighing, weighing-based material level, tension and stress measurement, and millivolt signal conversion from load cells. It is widely installed in chemical, plastics, metallurgy, building materials, feed and food plants, mounted on DIN35 rail inside a standard control cabinet alongside the PLC it talks to.


What is the difference between the TR700L and a weighing indicator?
A weighing indicator is built to show weight to an operator. The TR700L is a transmitter: it converts the load cell millivolt signal into a digital value and publishes it over RS-485, Modbus TCP, Profinet, EtherNet/IP or another fieldbus so the PLC or host computer can use it directly. It has no large front display for operators but keeps the same high-resolution measurement chain.
Which fieldbus networks can the TR700L connect to?
Available communication options are RS-232, RS-485, CAN (CANopen), CC-Link, Profibus-DP, Modbus TCP, Profinet and EtherNet/IP. Note that when dual Ethernet (Profinet plus EtherNet/IP) is selected, the analog output and the second RS-485 port cannot be used at the same time; single network port configurations have no such restriction.
How accurate and how fast is the measurement?
Internal resolution is 16,000,000 counts with a maximum display resolution of 200,000 divisions. Nonlinearity is within 0.005% of full scale and the sampling rate reaches 200 conversions per second, so fast filling and dosing steps are tracked without visible lag.
What happens if a transmitter fails and has to be replaced?
The TR700L supports calibration-free instrument replacement: the calibration data can be transferred to the replacement unit, so you do not need to put test weights on the scale again. Digital calibration is also supported if no weights are available on site.
Which load cells and analog outputs are supported?
It works with resistance strain-gauge load cells; the excitation is DC 10 V ±5% with up to 150 mA available. Analog output is selectable as 0-20 mA, 4-20 mA, 1-5 V or 0-10 V. Please confirm the required output, fieldbus and enclosure variant when ordering; lead time and warranty are quoted per order.
Solutions & Support
We go the extra mile to thoroughly analyze each project and deliver tailored business solutions that meet your specific requirements.
Copyright © 2026 singoo Technical supp
Contact US
×




