LONGTEC
  • Home
  • Products
    • Complete Filling Line
    • Standalone Machines
    • Analytical Instruments
    • Weighing Products
    • Level Instruments
  • About Us
  • Case
  • News
  • Service
  • Contact Us
  • 日本語
  • English
  • Español
  • русский язык
  • Français
  • بالعربية
Home  >  Products  >  Weighing Products  >  TR700M Intelligent Multi-Channel Weight Transmitter
tr700m-06-main.webp
tr700m-01-cover.webp
tr700m-02-dual-view-a.webp
tr700m-03-dual-view-b.webp
tr700m-04-key-specs.webp
tr700m-05-typical-applications.webp
tr700m-07-front-view.webp
tr700m-08-vertical-view.webp
tr700m-06-main.webp
tr700m-01-cover.webp
tr700m-02-dual-view-a.webp
tr700m-03-dual-view-b.webp
tr700m-04-key-specs.webp
tr700m-05-typical-applications.webp
tr700m-07-front-view.webp
tr700m-08-vertical-view.webp

TR700M Intelligent Multi-Channel Weight Transmitter

The LONGTEC TR700M puts two, four or six independent weighing channels into one 35 mm DIN-rail housing. Each channel is fully electrically isolated, so earth potential differences between tanks no longer leak interference into neighbouring scales, and each channel runs its own measurement and control task. A 16,000,000-count delta-sigma converter samples up to 200 times per second per channel. Industrial Ethernet on port one (Profinet, Modbus TCP or CC-Link IE Field Basic) and RS-485 or CAN on port two connect the transmitter to the host, and up to four units can be cascaded into a thirty-scale system with a single master link to the PLC.

Email: marketing@longtec.com

Tel: 00864007808806

Whatsapp: 8618269775217

REQUEST A QUOTE
Main Functions
Applications
Spec Sheet
FAQ
Main Functions

· Two, four or six weighing channels share one DIN-rail housing, cutting cabinet volume and field wiring on multi-hopper machines.

· Full electrical isolation between channels blocks earth potential differences and interference that normally couple between tanks.

· Each channel runs independently with its own 16,000,000-count measurement and 200 samples per second, so one fault does not stop the line.

· Profinet, Modbus TCP or CC-Link IE Field Basic on port one, with Profinet ring topology for redundant plant networks.

· Second RS-485 or CAN port extends a touch panel or display, and all settings can be configured from a web page in a browser.

· Cascade one master with four slaves to build a thirty-scale system that the host reads with a single communication cycle.

Applications

TR700M is chosen where several hoppers or tanks share one control cabinet: multi-ingredient batching plants, tank farms with weight-based inventory, multi-head filling machines, extruder lines with several gravimetric feeders, and test benches with many load channels. Mounting several channels in one housing cuts cabinet volume and wiring, and the cascade function keeps a single Ethernet connection to the PLC even on large installations.

Spec Sheet

TR700M dimension drawing

TR700M wiring diagram

FAQ

Why use a multi-channel transmitter instead of several single-channel units?

One TR700M replaces two, four or six separate transmitters, which saves DIN-rail space, terminal blocks and power wiring inside the cabinet. It also isolates the channels from each other electrically, so a ground potential difference on one tank does not disturb the readings of the others.

How many scales can one system handle?

A single unit carries two, four or six channels. Up to four units can be cascaded with one master and four slaves, giving a maximum of thirty scales. The host computer then reads the whole group with one communication cycle instead of polling each instrument.

Which network can I connect it to?

Port one offers Profinet, Modbus TCP or CC-Link IE Field Basic, one of the three selected at order. Profinet supports ring topology, and the built-in switch function allows hand-in-hand bus wiring between units. Port two offers RS-485 or CAN, for example to extend a touch panel display.

How is the transmitter configured?

Parameters can be set from a web page served by the instrument itself, so no special software is needed, and the configuration can be copied between channels. Please confirm the required channel count and network option when ordering.

Does each channel have its own calibration?

Yes. Every channel is an independent weighing instrument with its own calibration, filtering and limit settings, and all channels support resistance strain-gauge load cells with four 350 ohm cells per channel.

Related Products

TR200H Analog Weighing Signal TransmitterTR200H Analog Weighing Signal Transmitter
TR700L Digital Weight TransmitterTR700L Digital Weight Transmitter
TR700C Multi-Material Batching ControllerTR700C Multi-Material Batching Controller
TR700-LF Loss-in-Weight Feeding Control ModuleTR700-LF Loss-in-Weight Feeding Control Module
TR700-BC Belt-Scale Batching Control ModuleTR700-BC Belt-Scale Batching Control Module
TR700-Ex Explosion-Proof Weighing Control TerminalTR700-Ex Explosion-Proof Weighing Control Terminal
LONGTEC

Solutions & Support

We go the extra mile to thoroughly analyze each project and deliver tailored business solutions that meet your specific requirements.

  • TR200H Analog Weighing Signal Transmitter
  • TR700L Digital Weight Transmitter
  • UNI800S Digital Weight Transmitter
  • UNI900D3 Digital Weighing Instrument
  • IM2000 Online Infrared Moisture Analyzer
  • Company Profile
  • Why Choose Us 
  • Certificates
  • Company Partners
  • Privacy Policy
  • Tel: 400-7808-806
  • E-mail:marketing@longtec.com
  • Address:No. 3 Jinliang Road, Hongqi Town, Jinwan District, Zhuhai City, Guangdong Province, China

Copyright © 2026 singoo Technical supp

  • Whatsapp

  • Inquiry

Contact US

×