
















TR700C Multi-Material Batching Controller
The LONGTEC TR700C is a DIN-rail multi-material batching controller built on the TR700 digital weighing platform. It runs sequential cumulative batching of one to four materials, each with its own fast and slow feed stages, automatic drop-height correction, automatic taring and out-of-tolerance detection. A 16,000,000-count delta-sigma front end samples up to 200 times per second, and dynamic digital filtering removes the effect of platform shake. The controller keeps the full TR700 communication set, so batching recipes and weights can be exchanged with a PLC, DCS or host PC over RS-485, Modbus TCP, Profinet or EtherNet/IP.
· Controls sequential batching of one to four materials, each with independent fast and slow feed stages for accurate final weight.
· Automatic drop-height correction learns the in-flight material and trims the cut-off point, batch after batch, without operator input.
· 16,000,000-count delta-sigma measurement with 200 samples per second tracks fast filling steps without overshoot or lag.
· Automatic taring and out-of-tolerance detection flag a bad batch immediately instead of letting it reach the mixer.
· Full fieldbus set including RS-485, Modbus TCP, Profinet, EtherNet/IP, Profibus-DP and CC-Link for direct PLC integration.
· DIN35 rail housing with digital or physical calibration and calibration-free instrument replacement keeps spare-part swaps quick.
TR700C controllers are used where several materials are weighed into one batch: concrete and dry-mortar plants, asphalt mixing, chemical and plastic compounding, feed mills, food and premix plants and any hopper scale that doses four components or fewer. Because the enclosure is DIN35 rail mounted, several controllers can be lined up in one cabinet to serve a whole mixing line, with recipe changes made from the front keys or from the host system.


How many materials can the TR700C batch at the same time?
The TR700C handles sequential cumulative batching of one to four materials. Each material has its own fast and slow feed stage, so a small final increment can be added slowly to hit the target weight accurately.
Does it correct for material still falling after the feeder stops?
Yes. The controller applies automatic drop-height correction, which measures the in-flight quantity and adjusts the cut-off point in the following batches. It also offers automatic taring and out-of-tolerance detection so an incorrect batch is reported rather than silently accepted.
Can the TR700C work as a stand-alone controller without a PLC?
Yes. Recipes and setpoints can be entered from the front keys and the batch runs autonomously. When a PLC or host PC is available, weights and recipe data can be exchanged over RS-485/Modbus, Modbus TCP, Profinet, EtherNet/IP, Profibus-DP or CC-Link.
How is it calibrated if there are no test weights on site?
Digital calibration is supported, and calibration-free instrument replacement lets you move the existing calibration data to a new controller. Physical calibration with test weights is also available and is usually preferred when weights are on hand.
What is the difference between the TR700L and the TR700C?
The TR700L is a weight transmitter: it measures and transmits weight and provides limit outputs. The TR700C adds the batching engine on top of that platform, including multi-material sequencing, fast/slow feed control, drop-height correction and tolerance checking. Both share the same enclosure, wiring and communication options.
Solutions & Support
We go the extra mile to thoroughly analyze each project and deliver tailored business solutions that meet your specific requirements.
Copyright © 2026 singoo Technical supp
Contact US
×




