
















TR200H Analog Weighing Signal Transmitter
The LONGTEC TR200H is a DIN-rail mounted analog weighing signal transmitter that turns the millivolt output of strain-gauge load cells into a stable, high-precision analog signal. Built with SMT technology, it delivers more than 65,000 divisions of resolution, a two-stage active filter adjustable from 1 to 90 ms, and an ultra-wide 10-33 VDC supply. Two independent outputs, 4-20 mA / 0-20 mA current and 0-5 V / 1-5 V / 0-10 V voltage, wire straight into PLC, DCS or indicator inputs, making the TR200H a compact, low-power front end for process weighing and force measurement.
· Slim DIN-rail housing clips into standard control cabinets, saving panel space and cutting wiring time on both new builds and retrofits.
· Resolution above 65,000 divisions keeps small weight changes visible in batching, dosing and dynamic check-weighing applications.
· Two-stage active filter adjustable from 1 to 90 ms suppresses machine vibration and electrical noise without slowing response.
· Dual outputs, 4-20 mA / 0-20 mA current plus 0-5 V / 1-5 V / 0-10 V voltage, connect directly to PLC and DCS analog cards.
· Ultra-wide 10-33 VDC power supply tolerates unstable plant voltage and shares existing 24 V control circuits without extra converters.
· SMT construction with low power draw and a ±10 ppm/°C temperature coefficient holds readings steady in hot process areas.
TR200H transmitters are used wherever a load cell has to talk to a control system: hopper and silo scales, dynamic check-weighing, weighing-based material level measurement, tension and stress monitoring on webs and cables, and retrofit projects that need a clean 4-20 mA or 0-10 V weight signal. Typical industries are chemical, plastics, metallurgy, building materials, feed and food processing, where the slim DIN-rail housing fits standard control cabinets.


What is the TR200H and what does it do in a weighing system?
The TR200H is an analog weighing signal transmitter. It takes the weak millivolt signal from a resistance strain-gauge load cell, amplifies, filters and linearises it, then outputs a standard 4-20 mA or 0-10 V signal that a PLC, DCS or panel indicator can read directly. It is mounted on a DIN rail inside the control cabinet.
Which load cells and output signals does it support?
It works with resistance strain-gauge load cells across a 0-30 mV input range. Two outputs are available at the same time: 4-20 mA or 0-20 mA current, and 0-5 V, 1-5 V or 0-10 V voltage. The standard configuration is TR200H-3B; other output combinations are selected with the model code.
What resolution and filtering can I expect?
Resolution is greater than 65,000 divisions, so fine weight differences remain visible. The two-stage active filter is adjustable from 1 to 90 ms in 10 selectable levels, which lets you trade a little response speed for steadier readings on vibrating hoppers or mixers.
How is the TR200H powered and mounted?
The transmitter accepts a wide DC 10-33 V supply and mounts on a standard DIN rail with screw terminals for input and output wiring, so it fits existing control cabinets without a separate enclosure.
Can it replace an old analog transmitter in an existing panel?
In most cases yes, because the input range, DIN-rail form factor and standard 4-20 mA / 0-10 V outputs match common panel practice. Please send us the old model, its output signal and the load cell capacity so we can confirm pinout and configuration before you order. Calibration certificates, warranty terms and lead time are confirmed per order.
Solutions & Support
We go the extra mile to thoroughly analyze each project and deliver tailored business solutions that meet your specific requirements.
Copyright © 2026 singoo Technical supp
Contact US
×




