
















TR700-Ex Explosion-Proof Weighing Control Terminal
The LONGTEC TR700 Ex is an explosion-proof industrial weighing control display that combines weight display, signal transmission and control in one flameproof enclosure. A 50 x 150 mm window with 25 mm high six-digit LED digits stays readable across a hazardous area, and the IP65 housing resists dust and water wash-down. It accepts all resistance strain-gauge load cells at 10 V excitation, provides analog and digital outputs for interlocking, and carries explosion-proof marking Ex d IIB T6 Gb / Ex tD A20 IP65 T80 °C under certificate CQCEx19.1236X.
· Flameproof Ex d IIB T6 Gb enclosure with Ex tD A20 dust protection, certified under CQCEx19.1236X for hazardous areas.
· 50 x 150 mm display window with 25 mm six-digit LED digits stays readable from a distance on a reactor platform.
· IP65 protection resists dust, hose water and wash-down in chemical, coating and pharmaceutical plants.
· Drives six 350 ohm load cells at 10 V excitation with 180 mA, covering typical reactor and hopper weighing frames.
· Display, transmission and control in one unit, with analog output and relay contacts for pumps, valves and interlocks.
· Compact 250 x 312 x 122.5 mm housing weighs 8.5 kg and mounts close to the vessel, shortening load cell cable runs.
TR700 Ex displays are installed where flammable gas, solvent vapour or combustible dust is present: chemical and pharmaceutical reactors, coating and ink plants, solvent handling areas, paint mixing rooms, and powder handling in food and battery materials. Typical duties are reactor and tank weighing, hopper and bagging scales, and dosing control in Zone 1 or Zone 21 areas where a standard panel indicator is not permitted.



Which hazardous areas is the TR700 Ex suitable for?
The enclosure is marked Ex d IIB T6 Gb for flammable gas and Ex tD A20 IP65 T80 °C for combustible dust, with certificate CQCEx19.1236X and IP65 protection. That covers many Zone 1 gas and Zone 21 dust applications such as reactor platforms and solvent handling rooms. Always confirm the area classification with your safety engineer before installation.
How many load cells can be connected?
The 10 V excitation supply delivers up to 180 mA, which is enough for six 350 ohm load cells. For larger vessels, a summing junction box such as the JB-4-Ex or JB-6-Ex can be used in the hazardous area and the combined signal taken to the display.
Can the display be read from a distance?
The window measures 50 x 150 mm and the six-digit LED digits are 25 mm high, so weight can be read from the platform floor or from several metres away in poor light.
Does it provide outputs for pumps and valves?
Yes. The unit integrates display, transmission and control, and provides analog output and switching outputs for interlocking. Please tell us the outputs and the communication you need so the configuration can be confirmed before shipment.
What power supply is required?
DC 24 V is standard, with AC 220 V available as an option. Power consumption is a maximum of 10 W, and the electrical interface uses a G1/2 inch entry.
Solutions & Support
We go the extra mile to thoroughly analyze each project and deliver tailored business solutions that meet your specific requirements.
Copyright © 2026 singoo Technical supp
Contact US
×




