
















TR700-BC Belt-Scale Batching Control Module
The LONGTEC TR700-BC is a DIN-rail belt scale batching control module that turns belt load and belt speed into instantaneous flow and totalised weight. It accepts a 3 kHz pulse input from an NPN speed sensor, combines it with the load cell signal, and regulates the belt or feeder with a second-level PID algorithm so the delivered tonnage matches the setpoint. A predictive model control law anticipates the effect of each control change and an incremental control strategy keeps the output steady during manual-to-auto changeover.
· Combines belt load cells with a 3 kHz pulse input from an NPN speed sensor to calculate true t/h and total tonnage.
· Second-level PID with a predictive model law reacts to feed changes quickly while keeping overshoot on the belt small.
· Incremental control strategy holds the output steady when switching between manual and automatic, avoiding belt speed jumps.
· Up to eight 350 ohm load cells at 10 V excitation with a 0.3 to 30 mV input range and 16,000,000 internal resolution.
· Four isolated switch inputs and four relay outputs, plus 4-20 mA in/out for drives and PLC analog cards.
· RS-485 Modbus, CANopen and Ethernet Modbus TCP on board, and optional PWC networking for distributed batching lines.
TR700-BC modules are used on belt and spiral weigh feeders, belt batching scales, continuous proportioning lines and blending systems where material has to be delivered at a controlled t/h rate. Typical installations are cement and aggregate plants, asphalt mixing, coal handling, fertiliser and chemical blending, and mineral processing. The module can work alone or join a PWC network to build a multi-feeder batching system.


What does the belt scale controller need besides the load cells?
It needs a belt speed signal. The TR700-BC accepts a pulse input up to 3 kHz from an NPN speed sensor, which it multiplies by the belt load to obtain instantaneous flow and totalised tonnage. If your belt already has a speed encoder, confirm its output type and pulse rate with us before ordering.
Can it be used for batching as well as continuous weighing?
Yes. Besides continuous flow control it supports belt batching, where the controller totals the delivered quantity and stops the feeder at the target weight. The same module therefore covers both continuous proportioning and batch delivery on a belt.
How many load cells can be connected?
Up to eight 350 ohm load cells can be connected at 10 V excitation with 250 mA available, which covers most belt scale frames. The input range is 0.3 to 30.0 mV with 16,000,000 internal resolution.
Does it integrate with an existing PLC or DCS?
It offers RS-485 with Modbus, CAN with CANopen and Ethernet with Modbus TCP/IP, plus 4-20 mA analog input and output and four relay outputs. For plant-wide systems it can also join a PWC network as a node in a distributed batching line.
How do I choose between the TR700-LF and the TR700-BC?
Choose the TR700-LF for loss-in-weight feeders where the weight in the hopper decreases, and the TR700-BC for belt or spiral weigh feeders where load cells weigh a moving belt and a speed pulse is available. The two share the same enclosure, display and interfaces, so spare parts and operator training stay the same.
Solutions & Support
We go the extra mile to thoroughly analyze each project and deliver tailored business solutions that meet your specific requirements.
Copyright © 2026 singoo Technical supp
Contact US
×




