
















IM2000 Online Infrared Moisture Analyzer
The LONGTEC IM2000 measures moisture on a running conveyor without touching the material. A 4-inch lens looks down at the product from a working distance of 275 mm, fires near-infrared light at three wavelengths and compares the reflected energy with the reference channel, so the reading follows the water content rather than the colour or the surface of the material. Because nothing contacts the belt, there is no wear part and no drag on the product, and the response time of 1 s is short enough to close a control loop on a dryer or a mixer. An optical path compensation circuit corrects drift in the lamp and the detector automatically, which is what keeps the calibration stable over months of dust and heat. Compressed air purges the lens and cools the head, and ambient light does not affect the measurement as long as the spot is not in direct sunlight. The separate controller shows the moisture value on its display, holds the calibration curves and outputs 4-20 mA to the plant control system, with RS485 available as an option.
· Non-contact near-infrared measurement, so the belt, the product and the sensor suffer no wear and nothing is dragged along the line.
· Three-wavelength detection with automatic optical path compensation keeps the calibration stable through lamp ageing and dust build-up.
· 4-inch lens and compressed-air purge resist dust and steam, removing the main cause of drift on infrared moisture gauges.
· One-second response and 4-20 mA output are fast enough to close the loop on a dryer, a mixer or a blender.
· Measuring range 0-50 % moisture with repeatability of ±0.2 %, covering grain, wood, paper, glass batch and minerals.
· Separate controller keeps the display and calibration curves under the frame, with ambient light having no effect on the reading.
The IM2000 is used wherever moisture has to be known continuously rather than sampled in a laboratory: wood-based panels and particleboard before pressing, brewing and distilling grain, glass batch and ceramic granulate, food and feed powders, paper and fibreboard, fibreglass, and mineral products. It suits granular, fibrous, powdery and flake materials on belt conveyors, and the 4-20 mA output lets the value drive dryers, water addition or blending directly. The measuring head is mounted on a frame over the belt, typically after a dryer or before a press, where the material bed is even and the surface is representative.


Which materials can the IM2000 measure?
Granular, fibrous, powdery and flake materials: grain and oilseeds, wood chips and fibre, paper and board, glass batch, ceramic granulate, food and feed powders, minerals and chemicals. Each material gets its own calibration curve, set against laboratory oven results for that product.
How accurate is it in real production?
Typically 0.2 - 0.3 % moisture, or 5 % of the measuring range, depending on the material. Accuracy is set by the quality of the calibration samples, the evenness of the material bed and how representative the measuring spot is of the whole belt width.
How is the head installed over a conveyor?
On a bracket or frame above the belt, with the lens face 275 ± 50 mm from the material surface. Choose a point where the bed is level and the product is presented consistently, and shade the spot from direct sunlight. The bracket uses a Ø48 mm clamp hole, so the head can be swung out of the way for belt maintenance.
Do dust and steam disturb the measurement?
Less than on most infrared gauges. The 4-inch lens collects more light through a dusty window, and a compressed-air purge keeps dust and steam off the lens while cooling the head. Ambient light does not affect the reading at all.
How does it connect to my control system?
A 4-20 mA analogue output is standard and can be scaled to the moisture range you use; RS485 is available as an option. The controller also holds the calibration curves and the display, so the value can be read locally and used by the PLC or DCS at the same time.
Related Products
Solutions & Support
We go the extra mile to thoroughly analyze each project and deliver tailored business solutions that meet your specific requirements.
Copyright © 2026 singoo Technical supp
Contact US
×




