
















UNI900B Belt-Scale Controller
The LONGTEC UNI900B is a belt scale controller for continuous weighing on belt and screw conveyors. It reads the load cell signal together with the belt speed input and calculates flow rate and totalised weight, then drives the feeder through a PID loop so the belt delivers the set tonnage instead of drifting with material moisture or belt tension. Two analogue outputs mean one instrument can run two belt feeders as a batching pair. Physical calibration, test-weight calibration and feeder linear calibration are all supported, and a fast-convergence filter keeps the displayed flow steady without slowing the response. A high-brightness VFD shows flow, total and setpoints, and the metal housing carries physically isolated I/O, RS232/RS485 Modbus RTU, CAN, Modbus TCP and Profibus-DP for integration with a PLC or DCS.
· Drives one or two belt feeders from a single unit, with two analogue outputs for ratio or batching duty.
· Calculates flow rate and totalised weight from load cell plus belt speed, with moisture compensation and accumulation control.
· Second-level PID and model-predictive control adjust the feeder in advance, so overshoot stays small and response stays fast.
· Physical, test-weight and feeder linear calibration are all supported, so the scale can be proven against real material.
· All-metal housing with physically isolated I/O, RS232/RS485 Modbus RTU, CAN, Modbus TCP and Profibus-DP connectivity.
· Passed space radiation, high-voltage ESD and temperature testing; parameter backup and restore protect against accidental changes.
UNI900B controllers are used on belt (spiral) measuring scales and belt (spiral) batching scales in continuous production: cement and dry mortar lines, fertiliser and feed mills, chemical plants, mineral and aggregate handling, power station coal feeding, and any process where material is weighed while moving on a conveyor. The dual analogue output suits lines where two feeders must follow one ratio, and the CAN port lets several instruments work as a master-slave batching group.



Can one UNI900B control two belt feeders?
Yes. Two analogue outputs are available, so a single instrument can regulate two belt feeders at the same time, which is the usual arrangement for ratio batching on a belt scale.
How is the belt scale calibrated?
Three methods are supported: physical calibration with real material, calibration with test weights or hanging weights, and feeder linear calibration over several points. Most plants start with test weights and finish with a material run.
What does it need besides the load cell signal?
A belt speed signal from a tachometer or encoder. The controller combines load and speed to compute instantaneous flow (t/h) and the accumulated total, which is what the operator and the PLC actually use.
Which fieldbuses can it talk to a PLC?
RS232 and RS485 with Modbus RTU are standard, and the options add CAN, Modbus TCP and Profibus-DP. Several instruments can also be linked over CAN as a master-slave batching group.
Does it compensate for material moisture?
Yes. Moisture compensation is built in, so a wetter material does not silently shift the tonnage. Volume measurement mode is also available when the belt runs without reliable weighing.
Solutions & Support
We go the extra mile to thoroughly analyze each project and deliver tailored business solutions that meet your specific requirements.
Copyright © 2026 singoo Technical supp
Contact US
×




