
















UNI800C Multi-Material Batching Controller
The LONGTEC UNI800C is a panel-mount multi-material batching controller built on the UNI800 weighing platform. It runs sequential cumulative batching of one to four materials, each with its own fast and slow feed stage, and adds automatic taring, out-of-tolerance detection and automatic drop-height correction. A 16,000,000-count delta-sigma front end samples up to 200 times per second, so the fast feed can be cut early and the slow feed brought in accurately. The six-digit display keeps target, actual and deviation visible at the machine, and the full metal housing resists interference on industrial panels.
· Runs sequential cumulative batching of one to four materials, each with independent fast and slow feed stages.
· Automatic drop-height correction trims the cut-off point after each batch, holding final weight without operator adjustment.
· Automatic taring and out-of-tolerance detection report a bad batch at the machine instead of passing it downstream.
· Six-digit LED display in a full metal panel housing shows target, actual weight and deviation at eye level.
· 16,000,000-count delta-sigma conversion at 200 samples per second keeps fast feed cut-off accurate and repeatable.
· Same fieldbus range as the UNI800, from RS-485 Modbus up to Profinet, EtherNet/IP, Profibus-DP and CC-Link.
UNI800C controllers are used on panel-mounted batching machines that weigh several components into one batch: dry mortar and concrete admixture lines, paint and coating plants, plastic compounding, feed premix, food ingredient batching and chemical dosing skids. Because the unit fits a standard panel cut-out, several controllers can sit side by side on one control desk while each runs its own recipe.


How many components can one UNI800C batch?
It handles sequential cumulative batching of one to four materials. Each material has its own fast and slow feed stage, so the last few kilograms are added slowly to reach the target weight accurately.
What happens when the material in flight lands after the feeder stops?
Automatic drop-height correction measures the in-flight quantity and adjusts the cut-off point for the next batch, so the error is learned rather than repeated. Out-of-tolerance detection flags a batch that still misses the tolerance.
Can it run without a PLC?
Yes. Recipes and setpoints can be entered from the front keys and the controller runs the batch on its own. When a PLC is present, weights and recipe data can be exchanged over RS-485/Modbus, Modbus TCP, Profinet, EtherNet/IP, Profibus-DP or CC-Link.
How does the UNI800C differ from the UNI800?
The UNI800 is a weight transmitter with four limit outputs. The UNI800C adds the batching engine on the same hardware platform: multi-material sequencing, fast and slow feed control, drop-height correction, taring and tolerance checking. Externally the two look the same, which simplifies spare-part stock.
Which panel cut-out and supply does it need?
The unit is panel mounted and runs from DC 24 V (18-36 V) with a consumption of 6 W or less. Please confirm the panel cut-out drawing and the required output or fieldbus option when ordering; lead time and warranty are quoted per order.
Solutions & Support
We go the extra mile to thoroughly analyze each project and deliver tailored business solutions that meet your specific requirements.
Copyright © 2026 singoo Technical supp
Contact US
×




