LONGTEC
  • Home
  • Products
    • Complete Filling Line
    • Standalone Machines
    • Analytical Instruments
    • Weighing Products
    • Level Instruments
  • About Us
  • Case
  • News
  • Service
  • Contact Us
  • 日本語
  • English
  • Español
  • русский язык
  • Français
  • بالعربية
Home  >  Products  >  Weighing Products  >  UNI800 Digital Weight Transmitter
uni800-07-main-white.webp
uni800-01-cover.webp
uni800-02-dual-view-a.webp
uni800-03-dual-view-b.webp
uni800-04-key-specs.webp
uni800-05-typical-applications.webp
uni800-06-display-on.webp
uni800-08-white-angle.webp
uni800-07-main-white.webp
uni800-01-cover.webp
uni800-02-dual-view-a.webp
uni800-03-dual-view-b.webp
uni800-04-key-specs.webp
uni800-05-typical-applications.webp
uni800-06-display-on.webp
uni800-08-white-angle.webp

UNI800 Digital Weight Transmitter

The LONGTEC UNI800 is a panel-mount digital weight transmitter with a six-digit LED display and a full metal housing. It conditions the millivolt signal from resistance strain-gauge load cells with a 16,000,000-count delta-sigma converter sampling up to 200 times per second, and reports weight or fault codes on the front display. Four limit outputs, high-high, high, low and low-low, can be assigned to external control inputs for interlocking. Digital or physical calibration is supported, and a failed unit can be replaced without re-calibrating the scale.

Email: marketing@longtec.com

Tel: 00864007808806

Whatsapp: 8618269775217

REQUEST A QUOTE
Main Functions
Applications
Spec Sheet
FAQ
Main Functions

· Six-digit LED display in a full metal panel housing shows weight, setpoints and fault codes at the machine.

· 16,000,000-count delta-sigma conversion at up to 200 samples per second keeps filling and dosing steps accurate.

· Four limit outputs, high-high, high, low and low-low, drive relays or PLC inputs without extra hardware.

· Sensor fault diagnosis raises an alarm instead of showing a drifting weight, so a broken load cell is found quickly.

· Digital or physical calibration plus calibration-free instrument replacement avoids re-weighing the vessel after a swap.

· Fieldbus options include RS-232, RS-485, CAN, CC-Link, Profibus-DP, Modbus TCP, Profinet and EtherNet/IP.

Applications

UNI800 indicators are fitted in machine panels and control desks wherever an operator needs to read weight and the PLC needs the same value: hopper and silo scales, crane and hook scales, tensile and compression testers, weighing-based material level, and batching machines in grain, light industry, metallurgy, building materials, chemical, non-ferrous, energy and machinery plants. The compact panel housing keeps the display at eye level while the wiring stays inside the cabinet.

Spec Sheet

UNI800 spec table

UNI800 model selection table

FAQ

What is the difference between the UNI800 and the TR700L?

Both measure weight to the same 16,000,000-count resolution and offer the same fieldbus range. The UNI800 is a panel-mount instrument with a front display for the operator, while the TR700L is a DIN-rail transmitter intended for cabinets without an operator display. Choose the UNI800 when people need to read weight at the machine.

How many load cells can the UNI800 supply?

The excitation is DC 10 V ±5% with up to 120 mA available, which suits a typical four-load-cell hopper scale. For larger arrays, use a summing junction box to combine the cells before the indicator.

Can it interlock with my filling valve or PLC?

Yes. Four limit outputs are provided: high-high, high, low and low-low. Each can be assigned to drive a relay or a PLC input, so the indicator closes the feeder valve at the setpoint even without a PLC in the loop.

Is the UNI800 still available, and how is it calibrated?

The UNI800 (2016) is supplied as the current standard version. Calibration can be done with test weights or digitally, and a replacement unit can take over the existing calibration data so you do not need to re-weigh the vessel. Availability, lead time and warranty are confirmed per order.

What does the display show when a load cell fails?

The instrument performs sensor signal fault diagnosis and alarms instead of showing a plausible but wrong weight. Overload is indicated as O.L, which helps the operator distinguish an overload from a wiring fault.

Related Products

TR200H Analog Weighing Signal TransmitterTR200H Analog Weighing Signal Transmitter
TR700L Digital Weight TransmitterTR700L Digital Weight Transmitter
TR700C Multi-Material Batching ControllerTR700C Multi-Material Batching Controller
TR700-LF Loss-in-Weight Feeding Control ModuleTR700-LF Loss-in-Weight Feeding Control Module
TR700-BC Belt-Scale Batching Control ModuleTR700-BC Belt-Scale Batching Control Module
TR700M Intelligent Multi-Channel Weight TransmitterTR700M Intelligent Multi-Channel Weight Transmitter
LONGTEC

Solutions & Support

We go the extra mile to thoroughly analyze each project and deliver tailored business solutions that meet your specific requirements.

  • TR200H Analog Weighing Signal Transmitter
  • TR700L Digital Weight Transmitter
  • UNI800S Digital Weight Transmitter
  • UNI900D3 Digital Weighing Instrument
  • IM2000 Online Infrared Moisture Analyzer
  • Company Profile
  • Why Choose Us 
  • Certificates
  • Company Partners
  • Privacy Policy
  • Tel: 400-7808-806
  • E-mail:marketing@longtec.com
  • Address:No. 3 Jinliang Road, Hongqi Town, Jinwan District, Zhuhai City, Guangdong Province, China

Copyright © 2026 singoo Technical supp

  • Whatsapp

  • Inquiry

Contact US

×