LONGTEC
  • Home
  • Products
    • Complete Filling Line
    • Standalone Machines
    • Analytical Instruments
    • Weighing Products
    • Level Instruments
  • About Us
  • Case
  • News
  • Service
  • Contact Us
  • 日本語
  • English
  • Español
  • русский язык
  • Français
  • بالعربية
Home  >  Products  >  Weighing Products  >  JB-4/JB-6 Stainless-Steel Weighing Junction Box
jb-4-jb-6-06-main-white.webp
jb-4-jb-6-01-cover.webp
jb-4-jb-6-02-dual-view-a.webp
jb-4-jb-6-03-dual-view-b.webp
jb-4-jb-6-04-key-specs.webp
jb-4-jb-6-05-typical-applications.webp
jb-4-jb-6-07-inside-view.webp
jb-4-jb-6-06-main-white.webp
jb-4-jb-6-01-cover.webp
jb-4-jb-6-02-dual-view-a.webp
jb-4-jb-6-03-dual-view-b.webp
jb-4-jb-6-04-key-specs.webp
jb-4-jb-6-05-typical-applications.webp
jb-4-jb-6-07-inside-view.webp

JB-4/JB-6 Stainless-Steel Weighing Junction Box

The JB-4 and JB-6 are stainless steel junction boxes for load-cell weighing systems, where several load cells have to be summed into one signal before the controller. Inside is a PCB with high-accuracy resistors and dedicated terminal blocks: the cells connect to marked terminals, the summing and the corner adjustment are done on the board, and the signal leaves on a single cable to the weight transmitter. The stainless enclosure gives the corrosion resistance that a wash-down area or an outdoor silo needs, and the terminals are marked so that a cell can be changed without tracing wires. The box measures 195 x 140 x 50 mm with mounting holes at 70 x 35 mm, and it is available as JB-4 for four cells with JB-6 for six cells as an option.

Email: marketing@longtec.com

Tel: 00864007808806

Whatsapp: 8618269775217

REQUEST A QUOTE
Main Functions
Applications
Spec Sheet
FAQ
Main Functions

· Stainless steel enclosure with dedicated terminal blocks, for wash-down and outdoor weighing installations.

· High-accuracy resistors and a PCB on the summing board, which is what keeps the corner adjustment and the signal stable.

· Individual terminal blocks for each load cell, clearly marked, so a cell can be changed without tracing wires.

· JB-4 for four load cells with JB-6 for six as an option, covering most silo and platform configurations.

· 195 x 140 x 50 mm with mounting holes at 70 x 35 mm, a size that fits a standard bracket.

· Corrosion-resistant enclosure for plants where a painted mild-steel box fails within a few years.

Applications

The JB is used wherever several load cells make up one weighbridge, silo, hopper, tank or platform scale: truck scales, silo weighing, batching scales, tank weighing and platform scales. It is also used as a summing point in a retrofit, where an existing installation of four cells is rewired into a modern transmitter, and in wash-down or outdoor installations where a mild-steel box would corrode.

Spec Sheet

JB-4/JB-6 spec table

FAQ

Do I need the 4-cell or the 6-cell version?

Count the load cells on the scale. A silo or a platform usually has three or four, a longer weighbridge or a large tank may have six or eight. JB-4 covers four cells; JB-6 covers six. For more cells, two boxes can be cascaded or a larger enclosure specified.

Why does the box have resistors inside?

The resistors sum the cell outputs and allow the corner adjustment, so that each corner of the scale reads the same weight. That adjustment is what makes a platform scale accurate across its surface, and it is done once at commissioning.

Is it suitable for outdoor use?

The enclosure is stainless steel and the terminals are inside a closed box, so it is suited to outdoor silos and wash-down areas. The cable entries have to be made off with suitable glands so that water cannot run into the box along the cable.

Can I use it to replace an old mild-steel box?

Yes, and it is a common retrofit: the existing cells are re-terminated on marked terminals, the corner adjustment is redone, and the outgoing cable goes to the new transmitter. Take a note of the cell colour code before disconnecting.

Does it work with any load cell?

It is a passive summing board, so it works with milli-volt load cells of any brand as long as the excitation and the sensitivity are within the transmitter's range. It is not a digital junction box and does not address cells individually.

Related Products

TR200H Analog Weighing Signal TransmitterTR200H Analog Weighing Signal Transmitter
TR700L Digital Weight TransmitterTR700L Digital Weight Transmitter
TR700C Multi-Material Batching ControllerTR700C Multi-Material Batching Controller
TR700-LF Loss-in-Weight Feeding Control ModuleTR700-LF Loss-in-Weight Feeding Control Module
TR700-BC Belt-Scale Batching Control ModuleTR700-BC Belt-Scale Batching Control Module
TR700M Intelligent Multi-Channel Weight TransmitterTR700M Intelligent Multi-Channel Weight Transmitter
LONGTEC

Solutions & Support

We go the extra mile to thoroughly analyze each project and deliver tailored business solutions that meet your specific requirements.

  • TR200H Analog Weighing Signal Transmitter
  • TR700L Digital Weight Transmitter
  • UNI800S Digital Weight Transmitter
  • UNI900D3 Digital Weighing Instrument
  • IM2000 Online Infrared Moisture Analyzer
  • Company Profile
  • Why Choose Us 
  • Certificates
  • Company Partners
  • Privacy Policy
  • Tel: 400-7808-806
  • E-mail:marketing@longtec.com
  • Address:No. 3 Jinliang Road, Hongqi Town, Jinwan District, Zhuhai City, Guangdong Province, China

Copyright © 2026 singoo Technical supp

  • Whatsapp

  • Inquiry

Contact US

×